LED Lights

We bring forth for our clients an exclusive array of LED Lights that is sourced from some of the certified and trusted vendors of the market. Widely used in home, shops, showrooms, offices and conference halls for indoor lighting, these lights are manufactured using quality approved components at vendors' end. For providing more power per watt than incandescent light bulbs, these light are highly cherished in domestic market. Further, these are well-tested on various parameters of quality by our vendors to ensure their flawlessness.

Features:

• Low power consumption

• High illumination

• Prefect finish

Advantages of LED Lights:

• Efficiency : LEDs emit more light per watt than incandescent light bulbs. The efficiency of LED lighting fixtures is not affected by shape and size, unlike fluorescent light bulbs or tubes

• Color : LEDs can emit light of an intended color without using any color filters as traditional lighting methods need. This is more efficient and can lower initial costs.

• Size: LEDs can be very small (smaller than 2 mm2 and are easily attached to printed circuit boards

• On/Off time : LEDs light up very quickly. A typical red indicator LED will achieve full brightness in under a microsecond LEDs used in communications devices can have even faster response times

• Cycling : LEDs are ideal for uses subject to frequent on-off cycling, unlike fluorescent lamps that fail faster when cycled often, or HID lamps that require a long time before restarting.

• Dimming : LEDs can very easily be dimmed either by pulse-width modulation or lowering the forward current.

• Cool light : In contrast to most light sources, LEDs radiate very little heat in the form of IR that can cause damage to sensitive objects or fabrics. Wasted energy is dispersed as heat through the base of the LED

• Slow failure : LEDs mostly fail by dimming over time, rather than the abrupt failure of incandescent bulbs

• Lifetime : LEDs can have a relatively long useful life. One report estimates 35,000 to 50,000 hours of useful life, though time to complete failure may be longer. Fluorescent tubes typically are rated at about 10,000 to 15,000 hours, depending partly on the conditions of use, and incandescent light bulbs at 1,000 to 2,000 hours. Several DOE demonstrations have shown that reduced maintenance costs from this extended lifetime, rather than energy savings, is the primary factor in determining the payback period for an LED product

• Shock resistance : LEDs, being solid-state components, are difficult to damage with external shock, unlike fluorescent and incandescent bulbs, which are fragile